Garage Lighting Installation in Altadena, CA
Most garages are lit by one or two bare bulbs that barely reach the corners. That is fine for parking but poor for a workshop, a home gym, storage or working on a car. We upgrade garage lighting with bright, efficient LED fixtures, and add the circuits and outlets a working garage needs.
Garage Lighting Options
LED shop and linear fixtures
Linear LED fixtures give even, shadow-free light across the whole space, use a fraction of the energy of old fluorescent tubes, and start instantly in cold weather. We lay out fixtures for how you use the space: over the workbench, over each parking bay, and along storage walls.
Task lighting
Dedicated lighting over workbenches, tool walls and laundry areas, on its own switch.
Motion and vacancy sensors
Lights that come on when you walk in with your hands full, and switch off when you leave. California’s Title 24 code requires at least one light in a garage to be controlled by a vacancy sensor in new and altered lighting, and we install sensors that comply.
Exterior and driveway lighting
Motion-activated security lights over the garage door and driveway, and dusk-to-dawn fixtures, wired to code with weather-rated boxes.
Power for a Working Garage
A lighting upgrade is a good time to deal with the garage’s power. Older garages often have a single outlet shared with the door opener and lights, which trips the moment you run a saw or a compressor. We add:
- New GFCI-protected receptacle circuits along the walls and at the workbench
- 240-volt circuits for compressors, welders, kilns or a second refrigerator
- A garage sub-panel where several new circuits are needed, which is common in detached garages and garage conversions
- Ceiling receptacles for door openers and retractable cord reels
EV-Ready Garages
If an electric car is in your plans, the garage is where the charger goes. A Level 2 charger needs a dedicated 240-volt circuit, and many older Altadena homes need a load calculation, and sometimes a panel upgrade or load management, before one can be added. Planning it with the lighting work saves opening walls twice. See EV charger installation and panel upgrades.
Detached Garages and Conversions
Detached garages are often fed by an undersized or ageing underground or overhead cable. If you are converting a garage to a workshop, studio or ADU, the feed may need replacing and the space will need new circuits, smoke and CO alarms and code-compliant lighting. See electrical remodeling.
Common Garage Projects
- Replacing bare-bulb or fluorescent fixtures with LED linear lighting
- Adding a workbench circuit and task lighting
- Motion-sensor lighting inside and over the driveway
- Garage sub-panels for workshops and conversions
For lighting elsewhere in the home, see lighting installation.
Frequently Asked Questions
What is the best lighting for a garage?
LED linear or shop fixtures spread evenly across the ceiling, with task lighting over the workbench. They are bright, efficient and start instantly in cold weather.
Do garage lights need a motion sensor?
For new and altered lighting in California, Title 24 requires at least one garage light to be controlled by a vacancy sensor. Many homeowners prefer motion control anyway, for convenience.
Can my garage handle an EV charger?
That depends on your panel capacity and the existing feed to the garage. A load calculation tells us whether you can add a Level 2 charger as-is, need load management, or need a panel upgrade.
Call (626) 768-1402 or request service online. Office hours are Monday to Sunday, 10 am to 10 pm.
Pricing: Standard service call fee applies. We quote the fee on the phone before we dispatch, and credit it toward the repair if you go ahead.